Cold Fusion vs Aqua Bingo Fuel

Omicron · Newbie Joined: Oct 20, 2005 Posts: 4 Location: Montana

the first point I would like to make is that to begin with the related documentation is very disorganized and there is no real clear cut method, example or plan to follow.......... the people writing about doing this did not take very much care to get their point across

there were no links to the Cold Fusion process from any of the Bingo Fuel articles I have found, and I just stumpled acrosst it by happenstance. I only found it by random searching thru a 35,000 article Newslist. IN the early stages of the Cold Fusion Reaction CFR being capable of producing Hydrogen in excess of the Bingo or Aqua Fuel process was downplayed for something else.

So it is going to take some effort to massage the breif and arcane text of numerous attempts at the english translation.

Cold Fusion is basically a form of electrolysis, which is a elementary science project capable of most 10-12 year old kids when I was in school. We made Hydrogen for ballons and fire poppers when we were real young and the basic technology is fundamental and it doesnt take much to reveal that it is an excellent first choice alternative to Petroleum and Fossil products that we are literally creating our own Rapture with......

The point I am trying to make is that the layout of this, is so confusing and does not have any real structure or outline to follow and nothing is linked together and many LInks no longer connect. Unfortunately it is making it alot more complicated than it actually is.

Electrolysis basically makes it possible for you to create different results by altering the Electrodes, and the Voltage and Current which creates a different Plasma which make different Gases. Most of the attention of Cold Fusion in the articles I hacve read, were focused and devoted to the amount of Heat that was given off.

Very little further attention is given to using or developing it as a Fuel for INternal Combustion Engines, once the point has been made.

In this case...... I believe the number one priority of the Cold Fusion and Bingo Fuel is to get out from under the control of the Fuel, Electricity and Heating of the Homes and make us a FREE SOCIETY again !

Something any backyard Technician should have the capability of.

I would like to find some people who would like to develop this Alternative Fuel and become independant of this World Economic Crisis Hysteria

I dont notice there have been many Posts on this Topic here. This is an alternative to Petroleum and Nuclear Power.

Omicron · Newbie Joined: Oct 20, 2005 Posts: 4 Location: Montana

on Page http://jlnlabs.online.fr/cfr/html/cfr12.htm

there is a Cold Fusion Design, but is very obscure. It is not real clear just wetherto use an Isolation Transformer, a Variac or both. Typically a Isolation Transformer will have same Voltages to assure some kind of Line Stability.

Schematic of one transformer says 240/120, and the other says 240/240 but the document says that we need 160VDC at 4A which one wold be correct ? Anyone out there can help with this ? PLease jump in !

At this point, I believe it would be most practical to give an example, a part number or even a photo since the device mentioned is appearantly in that little blue box.

Some Pics or Diagrams (schematics ) will show one Condensor and the others show 2........

Does anyone have any comments out there ?

I am going to go get a Transformer wound and see what happens. Relicbale instructions do not seem to exist or I woiuld make one myself...

Omicron · Newbie Joined: Oct 20, 2005 Posts: 4 Location: Montana

In the documentation a Dewars Flask is used, (which is like a Thermos Bottle) which is like a double wall flask with vacuum in the middle so Heat cannot pass thru.

The Lab Monkeys are more concerned with the Temperature being put off, and we just want Hydrogen for Fuel so we can bypass a few steps.

I have been looking for a suitable vessel, that is non conductive and can manage the temperature of at least boiling water. I have concluded that a simple 1 gallon PVC Bucket will work and for a semi Air Tite lid, I am going to use something like a 1/2" plexiglas with a gasket..... not only so I can see thru it, but so I can tap threads and glue some air tite fittings,,,,,,,,,

Need to make room for Electrodes, thermometer, thermocouple for a pu,p to circulate water flow to keep water temp fairly constant, and something to port the Gas flow to someplace safe because there is going to be alot more volume than the Aqua - Bingo Fuel method.........

it is still; undetermined that some kind of heat exchange will be required as the heat of the Carbon Rod is to reach ~3000 degrees..... I am assuming you can heat a space by connecting this water flow to a Radiator and use a Blower Fan

I cant wait to be free from Petroleum Tyranny